铜业工程:2022(6):74-78
←前一篇   |   后一篇→
本文二维码信息
码上扫一扫!
常规两段浸出法提高锌焙烧矿中铜回收率的研究
吴钧, 曾鹏, 周中华, 邱伟佳, 张少博, 杨全胜, 姜艳
(云南云铜锌业股份有限公司)
Study on Improving Copper Recovery of Zinc Roasted Ore by Conventional Two-stage Leaching
摘要
图/表
参考文献
本刊相似文献
All Journals 相似文献
All Journals 引证文献
本文已被:浏览 1084次   下载 4090
投稿时间:2022-07-13    修订日期:2022-11-16
中文摘要: 分析了不同湿法炼锌工艺锌焙烧矿中回收铜的工艺,发现各工艺都存在不同的工艺缺点。借鉴国内锌冶炼企业开展的常规两段浸出法提高铜回收率的生产经验,进行了锌焙烧矿中铜、铁、硅的浸出机理研究,并且根据该机理提出了常规两段浸出法的改进工艺流程,按照该工艺流程开展了试验研究,将铜的回收率提高到了76.41%。
Abstract:In this paper, the recovery of copper from zinc roasted ore by different hydrometallurgy process is analyzes. It is found that the process with high copper recovery rate has different technical shortcomings. Referring to the production practice of improving copper recovery rate by conventional two-stage leaching carried out by domestic smelting enterprises, the leaching mechanism of copper, iron and silicon in zinc roasted ore is studied, and according to the mechanism, the conventional two-stage leaching is proposed to improve the process flow, and the experimental study is carried out according to the process flow, and the recovery rate of copper reached 76.41%.
文章编号:20220713002     中图分类号:TF811;TF813
基金项目:云南省科技创新人才计划(2019HC025)
引用文本: 吴钧,曾鹏,周中华,邱伟佳,张少博,杨全胜,姜艳.常规两段浸出法提高锌焙烧矿中铜回收率的研究[J].铜业工程,2022,(6):74-78