铜业工程:2021(5):79-81
本文二维码信息
码上扫一扫!
贵冶新购转炉送风机的选型与联动调试技巧
(江西铜业集团有限公司 贵溪冶炼厂,江西 贵溪 335424)
Selection and Linkage Debugging Skills of Converter Blower Newly Purchased by Guixi Smelter
(Guixi Smelter, Jiangxi Copper Corporation Limited, Guixi 335424, Jiangxi, China)
摘要
图/表
参考文献
本刊相似文献
All Journals 相似文献
All Journals 引证文献
本文已被:浏览 841次   下载 2345
投稿时间:2021-03-25    
中文摘要: 贵溪冶炼厂动力车间转炉送风机是为熔炼转炉吹炼时提供常氧空气的设备,风机运行时的出口风量与风压值随着转炉吹炼工况的变化同步发生改变,一旦风量与风压值不能满足转炉吹炼要求,将直接影响转炉吹炼效率,从而影响闪速炉的投料量.贵冶结合转炉生产工艺实际情况,简述了新购转炉送风机的选型方法、并介绍了风机安装投运后联动调试技巧.
中文关键词: 熔炼转炉  转炉风机  风量  风压  性能曲线
Abstract:The power compensation cabinet of the low voltage distribution room of Kaldor furnace in Guixi smelter has the phenomenon of burning out of capacitor, fuse and contactor etc., the failure rate is high and the expected compensation effect cannot be achieved. In terms of power quality compensation, the capacitor compensation cabinet is rarely used for compensation. The existing technology adopts SVG compensation. The main advantage of SVG is that it can not only improve the power factor, but also can be used to control harmonics to improve the whole power quality.
文章编号:20210522     中图分类号:TF806.2
基金项目:
引用文本: 林景峰.贵冶新购转炉送风机的选型与联动调试技巧[J].铜业工程,2021,(5):79-81